When using the meat grinder in Shijiazhuang, the following points should be noted:

1. Before use, check whether the components of the meat grinder from Shijiazhuang are complete and whether the components of each part are installed in place;

2. Connect the power supply and run the machine without any load to check if it operates normally;

3. Only put meat into the meat grinder for operation after confirming that the machine is free of any malfunction. The meat put in must be cut into long strips;

4. During the operation of the meat grinder in Shijiazhuang, hands must not be brought near the meat inlet. If it is necessary to operate the meat grinder at close range, tools must be used;

After the operation is completed, it is necessary to first turn off the power, then thoroughly clean the machine from inside to outside, and finally wipe it dry with a cloth for future use. It is important to note that the meat grinder should never be rinsed directly with water, as this may cause water to enter the machine, resulting in equipment leakage and potential safety accidents.